Electrical Engineers And Master Electricians EEAME Portal

...references, ebooks, standards and tutorials

  • Increase font size
  • Default font size
  • Decrease font size

List of commonly used International Standards in the Electrical industry.

Standards per page:
List of Electrical Standards
Standard Title
ANSI C37.06.1 "'American National Standard Guide for High-Voltage Circuit Breakers Rated on Symmetrical Current Basis Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times'
ANSI C37.121 American National Standard for Switchgear ??? Unit Substations ??? Requirements
ANSI C57.12.10 American National Standard for Transformers 230 kV and Below 833 / 958 through 8333 / 10 417 kVA, Single-Phase, and 750 / 862 through 60 000 / 80 000 / 100 000 kVA, Three-Phase Without Load Tap Changing; and 3750 / 4687 through 60 000 / 80 000 / 100 000 kVA with Load Tap Changing Safety Requirement
ANSI C57.12.20 American National Standard for Transformers, Standard for Overhead Type Distribution Transformers, 500 kVA and Smaller: High Voltage, 34500 Volts and Below: Low Voltage, 7970/13800Y Volts and Below
API RP 14C Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms
API RP 14F Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Division 1 and Division 2 Locations
API RP 14G Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms
API RP 500 Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2
API RP 505 Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2
API 546 Brushless synchronous machines 500KVA and above
IEC 60027 Letter symbols to be used in electrical technology Part 1: General
IEC 60028 International standard of resistance for copper-Edition 2
IEC 60034 Rotating electrical machines Part 1: Rating and performance
IEC 60038 IEC standard voltages
IEC 60050-448 International Electrotechnical Vocabulary Chapter 448: Power System Protection-Second Edition
IEC 60055-1 Paper-Insulated Metal-Sheathed Cables for Rated Voltages up to 18/30 kV (with Copper or Aluminium Conductors and Excluding Gas-Pressure and Oil-Filled Cables) Part 1: Tests on Cables and their Accessories-Edition 5.1; Consolidated Reprint
IEC 60055-2 Paper-Insulated Metal-Sheathed Cables for Rated Voltages up to 18/30 kV (with Copper or Aluminium Conductors and Excluding Gas-Pressure and Oil-Filled Cables) Part 2: General and Construction Requirements-First Edition; Amendment 1: 10-1989; Amendment 2: 02-2005
IEC 60063 Preferred Number Series for Resistors and Capacitors-Edition 2
IEC 60068-1 Environmental Testing Part 1: General and Guidance-Sixth Edition; Amendment 1-1992
IEC 60068-2-6 Environmental Testing - Part 2: Tests - Test FC: Vibration (Sinusoidal)-Sixth Edition; Corrigendum 1: 03/1995
  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  3 
  •  4 
  •  5 
  •  6 
  •  7 
  •  8 
  •  9 
  •  10 
  •  Next 
  •  End 
  • »