Electrical Engineers And Master Electricians EEAME Portal

...references, ebooks, standards and tutorials

  • Increase font size
  • Default font size
  • Decrease font size
Search
Search Only:

Search Keyword protection

Total: 22 results found.

Page 1 of 2
... operating since 1919, and a distributor of Budweiser and other beverages, decided to install solar power on its facility to reduce its energy costs while contributing to the protection of the ...  ...
... Occupational Safety and Health Administration Voluntary Protection Program .  ...
Total Energy Concepts has developed a unique process that reduces electric bills by 15% while providing a blanket of protection to residential and commercial facilities that cuts maintenance costs by 40%, ...
4. Earth Fault-Loop Impedance Part 2
(References/Tutorials)
... there will be no means of protective device will provide protection against touch voltage. At the location of the fault, there is a possibility that the full voltage is present in the equipment enclosure ...
5. Time-Current Curves with Excel IV
(References/Tutorials)
... better the coordination curve, here are the parameters. Please note that values are referred to the primary which is 11kV. Utility Supply (0.2 time multiplier) Voltage : 11kV SC Capacity : 75MVA Protection: ...
... of earthing is only known when an earth fault happens, however the occurrence of a fault may only be a split of a second as the protection system has already cleared out the fault. Do not let the test ...
7. Time-Current Curves with Excel III
(References/Tutorials)
... coordinate your protection settings with your power supplier. Normally the time setting for the network protection will be provided by the power supplier. We shall be discussing this on the next tutorial. ...
As electrical engineers, doing protective devices coordination is always a part of our tasks. You may say that I could always use ETAP or EDSA or SKM Power Tools to do the job. If your company has ...
...  Yes No Single Phasing Protection Standard Options Communication Interface Available None Additional features of metal-clad switchgear ...
IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems The objectives of electrical system protection and coordination are to prevent injury to personnel, ...
... equipment is included. Keywords: connection to earth, electronic equipment grounding, equipment grounding, lightning protection, static protection, system grounding  ...
12. Low Voltage Switchgear And Controlgear
(References/Specifications)
... conductors. Including general rules for an alphanumeric system IEC 60521 Class 0.5, 1 and 2 alternating current watt-hour meters IEC 60529 Degrees of protection provided by enclosures IEC 60617 Graphical ...
13. Liquid Immersed Power Transformers
(References/Specifications)
... system. IEC 60529 Degrees of protection provided by enclosures. IEC 60542 Application guide for on-load tap-changers. IEC 60551 Determination of transformer and reactor sound levels. IEC 60616 Terminal ...
14. High Voltage Induction Motors
(References/Specifications)
... Electrical apparatus for explosive gas atmospheres. IEC 60085 Thermal evaluation and classification of electrical insulation. IEC 60529 Degrees of protection provided by enclosures (IP code) IEC 60751 ...
15. Lightning protection
(News/Latest)
... protection. The charged cells in clouds normally attract charges of opposite polarity on the earth's surface or on high objects located directly below them. When the charge reaches a critical level causing ...
16. Transformer Explosion
(News/Blog)
... however, why did the transformer protection did not function as expected. I suspect that it may have been tinkered with to allow higher loads on the transformer. Why is it then that their engineers did ...
While searching the internet for some references, I came across Areva (formerly Alsthom) website. The book on Network Protection and Automation guide provides a comprehensive information on how tos. I ...
18. Earthing and Bonding
(News/Latest)
... due to sparking or arcing. The damage will usually increase with time. Effective earthing provides suffcient faults current to operate electrical protection relays reducing further damage to the electrical ...
19. Standards and Certification
(Standards News/General)
... to safety requirements and design criteria to warrant that it is safe in normal use. Certification The certification to safety standards gives also a degree of protection against legal action in ...
20. IEC 60079 - General Requirements
(Standards News/IEC)
... important when the types of protection 'flameproof enclosures "d"' (IEC 60079-1) and 'intrinsic safety "i"' (IEC 60079-11) are applied.  equirements given in this ...
  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  Next 
  •  End 
  • »